ICU2-082.5N-A3S2
Ramco Inductive Proximity Sensor
5 to 36 VDC with NPN - NO output
8mm diameter stainless steel housing
Non-shielded mounting type
2.5mm sensing range on ferrous metals
2m connection cable
Additional Part Information
5 to 36 VDC with NPN - NO output
8mm diameter stainless steel housing
Non-shielded mounting type
2.5mm sensing range on ferrous metals
2m connection cable
Additional Part Information
Market price: $50.00
Our price: $14.99
save 70%
A57A5DV3OT3DB6Z
Eaton rocker switch is single pole double throw (SPDT) momentary (on) maintained off. The illuminator series front panel mounted rocker switches are sealed to meet the watertight requirements of MIL-STD-108E. They have a temperature range of -40 F to +160 F and a dielectric strength 1800 V RMS @ sea level. Life cycle of 50,000 minimum electrical and 100,000 cycles minimum mechanical. Silver plated contacts are standard as well as flame retardant thermoplastic bezel and base. Mounting clips are stainless steel.
Additional Part Information
Additional Part Information
Market price: $24.40
Our price: $10.00
save 59%
C8939-9012KE
Oriental Motor PK245-01BA
Step angle 1.8°
2 Phase (Unipolar 4)
Installing base 1.65 inches square
Double shaft (.1831 inch) with attached encoder 400ppr
6 leads
Voltage: 4
Current per phase (A/Phase) 1.4
Holding Torgue 44.4 OZ-in
Resistance per Phase (winding) 7.5
Inductance per Phase (winding) 7.1
Rotor inertia 0.37 OZ-in2
Attached incremental Encoder:+5 volt, A & B channel, 100 kHZ
Additional Part Information
Step angle 1.8°
2 Phase (Unipolar 4)
Installing base 1.65 inches square
Double shaft (.1831 inch) with attached encoder 400ppr
6 leads
Voltage: 4
Current per phase (A/Phase) 1.4
Holding Torgue 44.4 OZ-in
Resistance per Phase (winding) 7.5
Inductance per Phase (winding) 7.1
Rotor inertia 0.37 OZ-in2
Attached incremental Encoder:+5 volt, A & B channel, 100 kHZ
Additional Part Information
Market price: $123.00
Our price: $60.00
save 51%
YR-140N-R1
Optex Polarized Retro-reflective Photoelectric Sensor
12 to 24 VDC with 2 NPN outputs of light-on and dark-on mode
0.5ms response time with 1 turn potentiometer
3.5 meter maximum sensing distance when using V-61 reflector (not included)
18mm front lens mountable or two M3 threaded side mount
Connection cable is 300mm long PVC cable
Additional Part Information
12 to 24 VDC with 2 NPN outputs of light-on and dark-on mode
0.5ms response time with 1 turn potentiometer
3.5 meter maximum sensing distance when using V-61 reflector (not included)
18mm front lens mountable or two M3 threaded side mount
Connection cable is 300mm long PVC cable
Additional Part Information
Market price: $45.00
Our price: $24.95
save 45%
C200HNC112
Single axis position control module provides either a step and direction pulse train or CW/CCW pulse train to control a single axis stepper or servo motor driver.
Interface signals include CW and CCW limits, origin approach, origin stop, emergency stop, and interrupt signals.
Automatic backlash and origin offset functions included for precise positioning requirements.
Move parameters may be set up in either ladder logic or by connecting the hand held programming console, and are stored by battery-backed memory.
Extensive diagnostics are available to the PLC for quick error detection.
Additional Part Information
Interface signals include CW and CCW limits, origin approach, origin stop, emergency stop, and interrupt signals.
Automatic backlash and origin offset functions included for precise positioning requirements.
Move parameters may be set up in either ladder logic or by connecting the hand held programming console, and are stored by battery-backed memory.
Extensive diagnostics are available to the PLC for quick error detection.
Additional Part Information
Market price: $1182.50
Our price: $336.12
save 72%
Categories
