ICPDAS 5Km Directional External Antenna
Gain 12dBi
VSWR 2 max.
Linear Polarization
Power Handling 10W
Impedance 50 Ohms
Connector SMA
Cable RG-58 100cm


Additional Part Information

ICPDAS 1Km Directional External Antenna
Gain 3dBi
Circular Polarization
Power Handling 5W
Impedance 50 Ohms
Connector SMA
Cable RG-58 100cm


Additional Part Information

ICPDAS 1Km Omni Directional External Antenna
Gain 8dBi
Linear Polarization
Power Handling 15W
Impedance 50 Ohms
Connector SMA Male
Cable RG-58 100cm


Additional Part Information

ICPDAS 24VDC Power Supply 40W
Input Voltage 90~264VAC
Output Voltage 24VDC 1.7A
Din Rail Mount


Additional Part Information

ICPDAS 1pt Thermocouple Input Module
Serial bus (RS-485) communication interface with DCON protocol.
For use with an I-7188 controller or standalone with a PC, any vendors
PLC with available serial port, or Red Lion HMI.
Resolution: 16-bit
Input type: +/-15mV, +/-50mV, +/-100mV,+/- 500mV , +/-1V,+/- 2.5V, +/- 20mA
Thermocouple Type J, K, T, E, R, S, B, N, C, L, M Sampling Rate: 10 Samples/Second (one-channel mode)
1 NPN Digital Input 3.5~30VDC
2 NPN Outputs 30VDC 30ma max per channel
Input Power: 10~30VDC 1.5W


Additional Part Information

ICPDAS 2pt Strain Gauge Input Module
Serial bus (RS-485) communication interface with DCON protocol.
For use with an I-7188 controller or standalone with a PC, any vendors
PLC with available serial port, or Red Lion HMI.
Resolution: 16-bit
Input type: +/-15mV, +/-50mV, +/-100mV,+/- 500mV , +/-1V,+/- 2.5V, +/- 20mA
Sampling Rate: 10 Samples/Second (one-channel mode)
2 Samples/Second (two-channel mode)
Excitation Voltage Output: 0~10VDC 40ma
1 PNP Digital Input 3.5~30VDC
4 NPN Outputs 30VDC 30ma max per channel
Input Power: 10~30VDC 3W


Additional Part Information

ICPDAS 8pt Analog Input Module
Fast Sampling Version
Serial bus (RS-485) communication interface with DCON protocol.
For use with an I-7188 controller or standalone with a PC, any vendors
PLC with available serial port, or Red Lion HMI.
Input Type: +/-150mV, +/-500mV, +/-1V, +/-5V, +/-10V
+/-20mA (requires optional external 125 ohm resistor)
Resolution: 16-bit (Normal Mode)
12-bit (Fast Mode)
Input Power: 10~30VDC 1.3W


Additional Part Information

ICPDAS 14pt Isolated Digital Input Module
with 16-bit counter for each Input
Serial bus (RS-485) communication interface with DCON protocol.
For use with an I-7188 controller or standalone with a PC, any vendors
PLC with available serial port, or Red Lion HMI.
Input Type: NPN or PNP 3.5~30VDC max.
Input Power: 10~30VDC 0.2W


Additional Part Information

ICPDAS 7pt Non-Isolated Digital Input
and 8pt Non-Isolated Digital Ouput Module
with 16-bit counter for each Input
Serial bus (RS-485) communication interface with DCON protocol.
For use with an I-7188 controller or standalone with a PC, any vendors
PLC with available serial port, or Red Lion HMI.
Input Type: NPN 4~30VDC max.
Output Type: NPN 30VDC 30ma max.
Output Rating: 5A @ 30VDC/250VAC
Input Power: 10~30VDC 0.4W


Additional Part Information

ICPDAS 16pt Non-Isolated Digital Input Module
with 16-bit counter for each Input
Serial bus (RS-485) communication interface with DCON protocol.
For use with an I-7188 controller or standalone with a PC, any vendors
PLC with available serial port, or Red Lion HMI.
Input Type: NPN 3.5~30VDC max.
Input Power: 10~30VDC 0.7W


Additional Part Information