Rees 30.5mm Momentary Pushbutton
Normally For Use With Electromagnetic Equipment
Up To 6 Seperate Circuits
Die Cast Zinc Body With Chrome Plated Plunger And Red Polycarbonate Insert
NEMA 12/13, IP65
Mechanical Life: 1,000,000 Operations
Electrical Rating; 6 Amps @ 110-120 VAC, 3 Amps @ 220-240 VAC, 1.5 Amps @ 440-480 VAC, 2.2 Amps @ 115-125 VDC, 1.1 Amps @230-250 VDC


Additional Part Information

Rees Translucent Plastic Lense
High Impact Polycarbonate
Additional Part Information

APEM 800 Series Push button switch
Solder lug terminals with snap-in bezel
Momentary action

Additional Part Information

EATON CORPORATION Potentiometer 22.5 mm
1000 Ohms .5 Watts
Black Bezel NEMA 4,4X, and 13

Additional Part Information

ABB fully assembled 3 hole pushbutton station
22mm operators
Up and Down green flush pushbuttons
Twist-to-release emergency stop pushbutton
PG13.5 and PG 16 cable entry


Additional Part Information

Honeywell Microswitch Red Mushroom Cap

Moeller 22mm pushbutton lock
Mounts with 22mm pushbutton
Flip cover and depress button to lock
Allows up to 2 padlocks


Additional Part Information

Eaton pushbutton switch 1 normally closed momentary contact (NC). This switch is rated at 28 Volts DC at 10 amps resistive and 5 amps inductive. The aluminum housing and bezel is filled with an epoxy resin with 8 inch 18 gauge wire leads. Panel mounting #3/4-14 NPSL (standard straight pipe thread) supplied with a ¾ inch conduit locknut

Additional Part Information

Eaton pushbutton switch 2 normally open momentary contacts (NO). This switch is rated at 28 Volts DC at 4 amps resistive and 2 amps inductive. The aluminum housing and bezel is filled with an epoxy resin with 8 inch 18 gauge wire leads. Panel mounting #3/4-14 NPSL (standard straight pipe thread) supplied with a ¾ inch conduit locknut.

Additional Part Information

Eaton pushbutton switch 1 normally closed momentary contact (NC). This switch is rated at 28 Volts DC at 10 amps resistive and 5 amps inductive. The aluminum housing and bezel is filled with an epoxy resin with 8 inch 18 gauge wire leads. Panel mounting 3/4-14 NPSL (standard straight pipe thread) supplied with a ¾ inch conduit locknut.

Additional Part Information