Oriental Motor PK245-01BA
Step angle 1.8°
2 Phase (Unipolar 4)
Installing base 1.65 inches square
Double shaft (.1831 inch) with attached encoder 400ppr
6 leads
Voltage: 4
Current per phase (A/Phase) 1.4
Holding Torgue 44.4 OZ-in
Resistance per Phase (winding) 7.5
Inductance per Phase (winding) 7.1
Rotor inertia 0.37 OZ-in2
Attached incremental Encoder:+5 volt, A & B channel, 100 kHZ

Additional Part Information

Oriental 2 Phase Stepping Motor 1.8 Degree Per Step 12 VDC 2.22in Square Base Holding Torque 58.3 OZ-IN/41.2 N-CM Rotor Inertia 0.60 OZ-IN Squared/110 g-CM Squared

Additional Part Information

Oriental Motors
•Stepping Motor, Step Angle 1.8degrees
•Size is 1.65" Sq.
•Has a double shaft, 5mm
•Voltage: 12VDC
•Current per phase: 0.4A/Phase
•Holging Torque: 30.5 OZ-in
•Resistance per Phase: 30 ohm/Phase
•Inductance per Phase: 22mH/Phase
•Rotor Inertia: 0.19OZ-in2
•Number of Leads: 6

Additional Part Information

Oriental Motor Vexta Stepper motor/Driver package
A self-contained compact chopper driver and 2 phase hybrid double shaft stepping motor
integrated into one convenient high performance package
High torque version
1.8 degree step angle
300 Oz-in holding torque
115v 50/60hz nominal input voltage


Additional Part Information